International conference proceedings

2016

  • C. J. O'Reilly and P. Göransson, "Economic and ecological influences on the design and adoption of new vehicle concepts,"in 22nd International Sustainable Development Research Society Conference, 2016, pp. 413-420.

  • C. J. O'Reilly and O. Dazel, "A wave expansion method for sound absorbing materials," in 22nd International Congress on Sound and Vibration, ICSV22, 2015, pp. 2797-2804.
  • T. W. Muld et al., "Analysis of flow structures in the wake of a high-speed train," in Proceedings aerodynamics of heavy vehicles III, buses, trucks and trains, 2016.
  • R. Rumpler, J. Herweijer och P. Göransson, "A CFD-based methodology to calculate the acoustic transfer impedance of thin triaxial woven fabrics," i WCCM 2016, 24-29 July, Seoul, Korea, 2016.

  • H. Rice, R. Rumpler och P. Göransson, "A development on fast frequency sweep methods for acoustic radiation problems," i ISMA 2016, 19 till 21 September, Leuven, Belgium, 2016.

  • E. Lundberg et al., "Comparison of two different simplified micro structures for calculating flow resistivity of anisotropic open cell porous foams.," i ISMA 2016, Leuven Belgium, 2016.

  • J. P. Parra Martinez et al., "Wave analysis of intrinsic phenomena related to anisotropic poroelastic materials in multilayered systems," i ISMA 2016 International Conference in Noise and Vibration Engineering and USD 2016 International Conference on Uncertainty in Structural Dynamics, Leuven, Belgium, 2016.

  • Pignier, N. J., Dahan, J. A., O'Reilly, C. J., Boij, S. Aeroacoustic analysis of a NACA duct, in Euronoise 2015, 10th European Congress and Exposition on Noise Control Engineering, Maastricht, Netherlands (2015)
  • N. Pignier, C. J. O'Reilly and S. Boij, "Aeroacoustic study of a submerged air inlet using an IDDES/FW-H approach and sound source modelling through direct numerical beamforming," in 22nd AIAA/CEAS Aeroacoustics Conference, 2016, 2016.

  • A. Rasam et al., "Aerodynamic noise prediction for a wind turbine using numerical flow simulations and semi-empirical modelling approaches," in 22nd AIAA/CEAS Aeroacoustics Conference, 2016.

  • A. Rasam, B. Karl and C. J. O'Reilly, "Detached-eddy simulation of a horizontal-axis wind turbine," in 6th Symposium on Hybrid RANS-LES Methods, 2016.

  • U. King et al., "Shape adaptive technology for aircraft engine nacelle inlets," in The Royal Aeronautical Society's 5th Aircraft Structural Design Conference, 2016.

  • J. Hammar, C. J. O'Reilly and G. Efraimsson, "Simulation of Aerodynamically Generated Noise Propagation Using the Wave Expansion Method," in 22nd AIAA/CEAS Aeroacoustics Conference, 2016, 2016.

  • J. Hammar, C. J. O'Reilly and G. Efraimsson, "Simulation of aerodynamically generated noise propagation using the wave expansion method," in 22nd AIAA/CEAS Aeroacoustics Conference, 2016.

  • W. Na, S. Boij and G. Efraimsson, "Acoustic characterization of a hybrid liner consisting of porous material by using a unified linearized navier-stokes approach," in 22nd AIAA/CEAS Aeroacoustics Conference, 2016, 2016.

  • W. Na, G. Efraimsson and S. Boij, "Numerical prediction of thermoacoustic instabilities with a V-Flame," in ICSV 2016 - 23rd International Congress on Sound and Vibration : From Ancient to Modern Acoustics, 2016.

  • F. Majić, G. Efraimsson and C. J. O'Reilly, "The influence of an adaptive nacelle inlet lip on fan noise propagation," in 22nd International Congress on Acoustics, 2016.

2015

  • F. Majić, G. Efraimsson and C. J. O'Reilly, "Aero-acoustic performance of adaptive nacelle inlet," in 21st AIAA/CEAS Aeroacoustics Conference, 2015.

  • N. Pignier et al., "Aeroacoustic analysis of a NACA duct," in 10th European Congress and Exposition on Noise Control Engineering, Euronoise, 2015.

  • F. Majić, G. Efraimsson and C. J. O'Reilly, "Aerodynamic performance of the adaptive nacelle inlet," in 33rd AIAA Applied Aerodynamics Conference, 2015.

  • E. Neri et al., "Characterization of low noise technologies applied to a full scale fuselage mounted nose landing gear," in 44th International Congress and Exposition on Noise Control Engineering, INTER-NOISE, 2015, pp. 1869-1878.

  • J. Hammar, C. J. O'Reilly and G. Efraimsson, "Simulation of aerodynamically generated sound using hybrid aeroacoustic methods," in 10th European Congress and Exposition on Noise Control Engineering, Euronoise, 2015, pp. 521-526.

  • Färm A., Boij S., Glav R., The influence of finite sample size on surface impedance determination of materials with low sound absorption at low frequencies, Euronoise 2015, 10th European Congress and Exposition on Noise Control Engineering, Maastricht, Netherlands (2015)

  •  J. P. Parra Martinez, O. Dazel, P. Göransson, and J. Cuenca, Calculation of internal powers for anisotropic porous materials within multilayered structures based on plane wave approximation, in Euronoise 2015, 10th European Congress and Exposition on Noise Control Engineering, Maastricht, Netherlands (2015).
  • M. M. Davari, J. Jerrelind‎, A. Stensson Trigell and L. Drugge, "A Multi-Line Brush Based Tyre Model to Study the Rolling Resistance ‎and Energy Loss", 4th International Tyre Colloquium: Tyre Models for Vehicle Dynamics Analysis, Guildford, UK (2015).
  • R. Rumpler och P. Göransson, "A Fast Frequency Sweep Approach with a priori Choice of Padé Approximants and Control of their Interval of Convergence," i VI International Conference on Computational Methods for Coupled Problems in Science and Engineering : COUPLED PROBLEMS 2015, 2015.

  • R. Rumpler och P. Göransson, "A fast frequency sweep approach with a priori choice of padé approximants and control of their interval of convergence," i COUPLED PROBLEMS 2015 : Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering, 2015, s. 881-892.

  • P. Göransson, J. Cuenca och C. Van der Kelen, "EXPERIMENTAL-NUMERICAL METHODS FOR INVERSE CHARACTERISATION OF SOME MATERIAL PROPERTIES OF ANISTROPIC-ANELASTIC POROUS MATERIALS," i NOVEM 2015 Noise and Vibration - Emerging Technologies, Dubrovnik Croatia, 2015.

  • J. Cuenca, C. Van der Kelen och P. Göransson, "Inverse estimation of the elastic and anelastic properties of anisotropic foams : study of the static/dynamic separation.," i EURONOISE 2015, 2015.

  • E. Lundberg et al., "Predicted and measured anisotropic acoustic and elastic properties for open cell porous material and their influence on typical train applications," i EURONOISE 2015, 2015.

  • G. Efraimsson, G. Kreiss and B. Krank, "Analysis of stretched grids as buffer zones in aero-acoustic simulations in two space dimensions," in 22nd International Congress on Sound and Vibration, ICSV 2015, 2015.

  • O. Kårekull, G. Efraimsson and M. Åbom, "CHALLENGES AND OPPORTUNITIES FOR FLOW NOISE PREDICTION IN HVAC SYSTEMS," in INTERNATIONAL CONFERENCE ON FAN NOISE, TECHNOLOGY AND NUMERICAL METHODS, 15-17 APRIL 2015 L’Espace Tête d’Or, Lyon, France, 2015.

  • W. Na, G. Efraimsson and S. Boij, "Prediction of thermoacoustic instabilities in combustors using linearized Navier-Stokes equations in frequency domain," in 22nd International Congress on Sound and Vibration, ICSV 2015, 2015.

2014

  • C. J. O'Reilly et al., "Life-cycle energy optimisation for sustainable vehicle design," in FISITA World Automotive Congress, 2014.

  • J. A. Dahan, C. O'Reilly and G. Efraimsson, "Numerical investigation of a realistic nose landing gear," in 20th AIAA/CEAS Aeroacoustics Conference, 2014.

  • L. da Rocha-Schmidt et al., "Progress Towards Adaptive Aircraft Engine Nacelles," in 29th Congress of the International Council of the Aeronautical Sciences, ICAS, 2014.

  • Prediction of acoustic surface impedance of bulk reacting lining with grazing flow, Proceedings of the 21st International Congress on Sound and Vibration (ICSV), Beijing, China (2014).
  • Pignier, N., O'Reilly, C., Boij, S. Une Méthode Numérique pour Calculer la Diffusion Acoustique d'une Source Mobile par Plusieurs Objets, in 12e Congrès Francais d'Acoustique, Poitiers, France (2014)
  • Lundberg O., Nordborg A., Lopez Arteaga I., La generación de ruido en el contacto entre la rueda y el carril - efectos no lineales, Congreso Iberoamericano de Acústica, Valdivia, Chile (2014).
  • Lundberg O., Nordborg A., Finnveden, S., Lopez Arteaga I., Estimation of nonlinearities in the wheel-rail rolling noise generation process, ISMA, Leuven, Belgium (2014)
  • Lundberg O., Finnveden S., Lopez I., Björklund S., Non-linear contact stiffness and dynamic contact filter for rolling contacts, FISITA, Maastricht, The Netherlands (2014)
  • M. M. Davari, J. Jerrelind, A. Stensson Trigell and J. Edrén," Investigating the Potential of Wheel ‎Corner ‎Modules in Reducing ‎Rolling Resistance of Tyres", FISITA '14 World Automotive Congress, Maastricht, Netherland (‎‎‎2014)‎.
  • J. P. Parra Martinez, P. Göransson, O. Dazel, and J. Cuenca, Analysis of the frequency response behaviour of anisotropic multilayered structures and potential acoustic performance optimizations, in ISMA 2014 International Conference in Noise and Vibration Engineering and USD 2014 International Conference on Uncertainty in Structural Dynamics, Leuven, Belgium (2014) pp. 4375-4386
  • J. P. Parra Martinez, P. Göransson, O. Dazel, and J. Cuenca, Acoustic response modelling of multilayered structures with anisotropic porous materials, in SAPEM 2014, Symposium on the Acoustics of Poro-Elastic Materials, Stockholm, Sweden (2014).
  • J. P. Parra Martinez et al., "Analysis of the frequency response behaviour of anisotropic multilayered structures and potential acoustic performance optimizations," i Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics, 2014, s. 4279-4290.

  • P. Göransson, "Exploring multi-functionality in poro-elastic materials with consideration given to some aspects related to the influence of scale, shape and space," i 11th World Congress on Computational Mechanics WCCM XI, 2014.

  • K. Gao et al., "Homogenization of sound propogation in a deformable porous material based on microscopic viscous-thermal effects.," i SAPEM 2014 Symposium on Acoustics of Poroelastic Materials, 2014.

  • K. Gao et al., "Microstructure-based numerical modelling of foams for acoustic shielding," i 21st International Congress on Sound and Vibration 2014, ICSV 2014, 2014, s. 881-887.

  • R. Rumpler, P. Göransson och H. Rice, "Nested Padé approximants as a tool for multivariate finite element problems with porous media ," i Symposium on the Acoustics of Poro-Elastic Materials December 16-17-18, 2014, Stockholm (Sweden), 2014.

  • E. Lundberg et al., "Sensitivity of macroscopic properties of a multi-layer panel including porous material on the micro-level parameters of an open cell porous material," i PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014), 2014, s. 2135-2149.

  • P. Göransson och E. Lind Nordgren, "Vibro-acoustic energy propagation in anisotropic, anelastic porous materials," i Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, 2014, s. 83-90.

  • M. A. Temiz et al., "Acoustic end correction in micro-perforated plates - Revisited," in 21st International Congress on Sound and Vibration 2014, ICSV 2014, 2014, pp. 1203-1209.

  • A. Rynell et al., "Acoustical Broadband signatures from RANS Turbulence Quantities," in The 21st International Congress on Sound and Vibration, 2014, pp. 1541-1548.

  • N. Winkler et al., "Aerodynamics of road vehicles in transient cross-winds-coupling aero to vehicle dynamics," in Proceedings of the Mini Conference on Vehicle System Dynamics, Identification and Anomalies, 2014, pp. 63-70.

  • R. Futrzynski and G. Efraimsson, "Effect of a SDBD on the drag of a half-submerged cylinder in crossflow," in ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2014, Collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, 3 August 2014 through 7 August 2014, 2014.

  • W. Na, S. Boij and G. Efraimsson, "Simulations of acoustic wave propagation in an impedance tube using a frequency-domain linearized navier-stokes methodology," in 20th AIAA/CEAS Aeroacoustics Conference, 2014.

  • W. Na, G. Efraimsson and S. Boij, "Simulations of the scattering of sound waves at a sudden area expansion in a 3D duct," in 21st International Congress on Sound and Vibration 2014, ICSV 2014, 2014, pp. 1420-1427.

2013

  • Jerrelind J., Edrén J., Li S., Davari M. M., Drugge L., Stensson Trigell A., Exploring active camber to enhance vehicle performance and safety, 23rd International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD), Qingdao, China, (2013).
  • Lundberg O., Finnveden S., Lopez I., Björklund S., Non-linear contact forces for beam/ball-interaction and its influence on the dynamic response of the beam, Proceedings of the Internoise conference, Innsbruck, Austria (2013).
  • Rynell A., Efraimsson G, Chevalier M and Åbom M, Quiet and efficient cooling for IC-engine powered systems, Internoise, Innsbruck, Austria (2013).
  • O. Kårekull and G. Efraimsson, "Comparison of RANS parameters for flow noise prediction," in 42nd International Congress and Exposition on Noise Control Engineering 2013, INTER-NOISE 2013 : Noise Control for Quality of Life, 2013, pp. 5916-5925.

  • B. Krank and G. Efraimsson, "Evaluating stretched grids and introducing black hole layers as alternative non-reflecting buffer zone," in 19th AIAA/CEAS Aeroacoustics Conference, 2013.

  • A. Kierkegaard, G. Efraimsson and A. Agarwal, "Simulations of a liner cell using a frequency-domain linearized Navier-Stokes methodology," in 19th AIAA/CEAS Aeroacoustics Conference, 2013.

  • Färm A., Boij S., The Effect of Boundary Layers on Bulk Reacting Liners at Low Mach Number Flows, Proceedings of the 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany (2013).
  • Färm A., Boij S., Göransson P, Glav R, On internal mean flow in porous absorbers and its effect on attenuation properties, Proceedings of the 21st International Congress on Acoustics (ICA), Montréal, Canada (2013).
  • Rumpler R., Deü J.-F. and Göransson P., Modal approach and Padé approximants for the efficient modelling of sound absorbing porous materials in structural-acoustic finite element problems, 2nd ECCOMAS Young Investigators Conference (YIC 2013), Bordeaux, France (2013).
  • Rumpler R. and Göransson P., A finite element solution strategy based on Padé approximants for fast multiple frequency sweeps of coupled elastic, poroelastic and internal acoustic problems, International Congress on Acoustics (ICA 2013), Montréal, Canada (2013).
  • R. Rumpler och P. Göransson, "A finite element solution strategy based on Padé approximants for fast multiple frequency sweeps of multivariate problems," i Proceedings of Meetings on Acoustics : Volume 19, 2013, 2013, s. 065003.

  • R. Rumpler och P. Göransson, "Fast frequency sweeps using Padé approximants for the finite element solution of multivariate structural-acoustic problems," i ICA 2013 : 21st International Congress on Acoustics - 165th Meeting of the Acoustical Society of America, Jun 2, 2013 - Jun 7, 2013, Montreal, Canada, 2013.

  • K. Gao et al., "Microstructure-based numerical modeling of the solid-fluid coupling interaction in acoustic foams," i Poromechanics V - Proceedings of the 5th Biot Conference on Poromechanics, 2013, s. 2123-2130.

  • P. Göransson, J.-F. Deü och O. Dazel, "Sensitivity of Vibroacoustic Response in  Multi-Layered Anisotropic Poro-Elastic Panels with Non-Aligned Properties," i AIA-DAGA 2013 Conference on Acoustics, 2013.

  • Schneider C., Kazemahvazi S., Zenkert D., Battley M., High strain rate compressive behavior of Self Reinforced- Poly(ethylene terephtalate) composite corrugated cores, 19th International Conference on Composite Materials (ICCM 19), Montréal, Canada (2013).
  • Åkermo M., Larberg Y.R., Sjölander J. and Hallander P., Influence of interply friction on the forming of stacked prepreg, 19th International Conference on Composite Materials (ICCM-19), Montréal, Canada (2013).
  • Andre A., Norrby M., Åkermo M., Nilsson S. and Nyman T., An experimental and numerical study of the effect of some manufacturing defects, 19th International Conference on Composite Materials (ICCM-19), Montréal, Canada (2013).
  • Hallander P., Ydrefors L. and Åkermo M., Forming of prepreg composite parts with aligned multi wall, carbon nanotubes, 19th International Conference on Composite Materials (ICCM-19), Montréal, Canada (2013).
  • Poulikidou S., Björklund A., Tools for sustainable product development: Experience and requirements from the vehicle manufacturing industry in Sweden, 6th International Conference on Life Cycle Management (LCM), Gothenburg, Sweden, (2013).
  • C. J. O'Reilly et al., "An Investigation into Shock Oscillation Noise Reduction," in 4th CEAS Air and Space Conference, 2013.

  • C. J. O'Reilly, "Acoustic propagation in a lined duct using a wave expansion method," in 41st International Congress and Exposition on Noise Control Engineering, INTER-NOISE, 2012, pp. 6577-6587.

2012

  • Jerrelind J., Lopez Arteaga I., Drugge L. and Kari L., Effects of non-linear wheel suspension bushing on vehicle response, DETC2012-71224 in proceedings from ASME Design Engineering Technical Conferences, Chicago, IL, USA (2012).
  • Jerrelind J, Drugge L, Stensson Trigell A, Nybacka M, Simulation of vehicle-overhead power system interaction on electric roads, VSDIA 2012, Budapest, Hungary (2012.)
  • Östberg M., Waves in elastic and poro-elastic cylinders with spatially varying anisotropy, International Conference on Noise and Vibration Engineering (ISMA 2012), Leuven, Belgium (2012).
  • Färm A., Boij S. and Glav R., On Sound Absorbing Characteristics and suitable Measurement methods, Proceedings of the 7th International Styrian Noise, Vibration and Harshness Congress, Graz, Austria (2012).
  • Färm A., Glav R. and Boij S., On variation of absorption factor due to measurement method and correction factors for conversion between methods, Proceedings of the Inter Noise conference, NYC, USA (2012).
  • Thomas D., Berg M., Diedrichs B. and Stichel S., Rail Vehicle Response to Lateral Carbody Excitations Imitating Crosswind, extended paper presented at XXIII International Congress of Theoretical and Applied Mechanics (ICTAM), Beijing, China (2012).
  • Kumar R.S., Feng L. and Orrenius U., Modelling the sound transmission through rib stiffened double-leaf partitions with cavity absorption, Noise and Vibration: Emerging Methods (NOVEM 2012), Sorrento, Italy (2012).
  • Nadampalli R. V., Göransson P. et al. Modelling and implementation of interface loss models for linear response simulation in a complex structure, NOVEM 2012, Sorrento, Italy (2012).
  • Rumpler R., Deü J.-F. and Göransson P. A Padé approximant reconstruction scheme for fast resolution of structural-acoustic finite element models including porous materials, NOVEM 2012, Sorrento, Italy (2012).
  • Nadampalli R. V., Göransson P. et al. On linear modelling of interface damping in a complex vibrating structure, International Symposium on the Computational Modelling of Vehicle Body Noise and Vibration (COMVEBONOV 2012), Sussex, UK (2012).
  • Rumpler R., Deü J.-F. and Göransson P. An enhanced modal-based reduction of 3D porous materials modelling for efficient computation of structural-acoustic finite element applications, International Symposium on the Computational Modelling of Vehicle Body Noise and Vibration (COMVEBONOV 2012), Sussex, UK (2012).
  • Krank B., Ohlsson U., Göransson P. et al, Tuning spot weld models for vehicle body structural dynamics, International Conference on Noise and Vibration Engineering (ISMA 2012), Leuven, Belgium (2012).
  • Nadampalli R., Göransson P. et al, Finite element formulation and implementation of poroelastic materials in an unbonded case, International Conference on Noise and Vibration Engineering (ISMA 2012), Leuven, Belgium (2012).
  • Poulikidou S., Tyskeng S., Björklund A., Wennhage P., Integration of environmental aspects in product design and development: an interview study of vehicle manufacturers in Sweden, Paper presented at the 19th International Product Development Management Conference, Manchester, UK (2012).
  • Laurenti R., Lazarevic, D. A., Poulikidou S., Montrucchio V., Frostell B., Bistagnino L., Wennersten R, Using causal maps to identify potential sources of environmental impact outside the scope of LCA studies: preliminary findings from case studies on washing machines and road vehicles, Paper presented at the 18th Annual International Sustainable Development Research Conference, Hull, UK (2012).
  • Hallander P., Nyman T. and Åkermo M, Influence of the forming process on the shape distortion of a composite C-shaped aerospace spar, 15th European Conference on Composite Materials (ECCM-15), Venice, Italy (2012).
  • Tahir M. W., Hallström S. and Åkermo M., Impregnation of 3D woven integrated fibre and thermoplatics preforms, 15th European Conference on Composite Materials (ECCM-15), Venice, Italy (2012).
  • C. J. O'Reilly et al., "Aero-acoustic simulations of an orifice plate mounted in a low-Mach-number ducted flow," in 18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference), 2012.

  • C. J. O'Reilly et al., "Numerical investigation of self-sustained shock oscillation acoustics," in 10th International Conference on Flow-Induced Vibration and Flow-Induced Noise, FIV, 2012, pp. 681-688.

2011

  • Östberg M. and Göransson P., On cylindrical waves in anisotropic Cartesian materials and its implications on the harmonic mode separability assumption, Symposium on the Acoustics of Poro-Elastic Materials 2011, Ferrara, Italy (2011).
  • Thomas D., Berg M., Diedrichs B. and Stichel S., Rail Vehicle Response to Lateral Carbody Excitations Imitating Crosswind, paper presented at 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD´11), Manchester, UK (2011).
  • Favre T., Efraimsson G. and Elofsson P., Detached-Eddy Simulations for Steady and Unsteady Crosswind Aerodynamics of Ground Vehicles, AIAA-2011-3066, 20th AIAA Computational Fluid Dynamics Conference, Honolulu, Hawaii (2011).
  • Wennberg D., Stichel S. and Wennhage P., Selection of sandwich panels for the load carrying structure of high-speed rail vehicles, 16th International Conference on Composite Structures (ICCS16), Porto, Portugal (2011).
  • Rumpler R., Deü J.F. and Göransson P., Efficient solution strategies for structural-acoustic FE applications with 3D modelling of porous materials, SAPEM 2011, Ferrara, Italy (2011).
  • Cuenca J. and Göransson P., Inverse estimation of the elastic and anelastic properties of the porous frame of anisotropic open-cell foams, SAPEM 2011, Ferrara, Italy (2011).
  • Van der Kelen C. and Göransson P., Inverse estimation of static flow resistivity in porous materials - discussion of the method and results for two tested porous materials, SAPEM 2011, Ferrara, Italy (2011).
  • Göransson P., Convergence aspects in finite element solutions of multi-layered, heterogeneous porous materials, Keynote Lecture, SAPEM 2011, Ferrara, Italy (2011).
  • Göransson P., The Multifunctional and Multidisciplinary Design Paradigm - ongoing research within the Centre for ECO2 Vehicle Design, FUMAT 2011, Warsaw, Poland (2011).
  • Åkermo M., Larberg Y. R., Hallander P., Forming of advanced components out of pre-stacked crossplied UD prepreg, 18th International Conference on Composite Materials (ICCM-18), Jeju Island, South Korea (2011).
  • Hallander P. and Åkermo M., Automated forming of pre-stacked UD prepregs, 22nd International Conference on Composite Materials (SICOMP), Gothenburg, Sweden (2011).
  • Zenkert D., Kaufmann M. and Åkermo M., Optimisation of Composite Structures: Design for Cost, International Conference on Composites for 21st Century: Current & Future Trends, Bangalore, India (2011).
  • C. J. O'Reilly et al., "Numerical simulation of flow-induced sound generation from an orifice in a low Mach number ducted flow," in 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), 2011.

2010

  • Rehnberg A. and Drugge L., Influence of tyre properties on the ride dynamics of heavy off-road vehicles, Proceedings of the 9th Asia-Pacific ISTVS Conference (ISTVS 2010), Sapporo, Japan (2010).
  • Östberg M. and Göransson P., Prediction of noise transmission through anisotropic multilayered aircraft fuselage, using finite element models including porous, elastic and fluid domains, ISMA - International Conference on Noise and Vibration Engineering 2010, Leuven, Belgium (2010).
  • Favre T. and Efraimsson G., Numerical study of design alterations affecting the crosswind characteristics of a generic road vehicle model, 8th MIRA International Vehicle Aerodynamics Conference, Grove, United Kingdom (2010).
  • Favre T. and Efraimsson G, Detached-Eddy Simulations of the Effects of Different Wind Gust Models on the Unsteady Aerodynamics of Road Vehicles, Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting & 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Quebec, Canada (2010).
  • Feng L., Kumar R. S., On application of radiation loss factor in the prediction of sound transmission of a honeycomb panel, The 17th International Congress on Sound & Vibration (ICSV 17), Cairo, Egypt (2010).
  • Orrenius U., Wareing A., Kumar R. S., Prediction and control of sound transmission through honeycomb panels for aircraft fuselage and train floors, The 17th International Congress on Sound & Vibration (ICSV 17), Cairo, Egypt (2010).
  • Cameron C. J., Lind E., Wennhage P., Göransson P., Balancing Structural and Acoustic Performance of Sandwich Panels for Vehicle Applications with Topology, Property, and Size Optimization, The 7th Asian-Australasian Conference on Composite Materials (ACCM 7), Taipei, Taiwan (2010).
  • C. J. O'Reilly and H. J. Rice, "A Lighthill based jet noise model for acoustic shielding prediction," in 17th International Congress on Sound and Vibration, ICSV17 : Volume 1, 2010, pp. 558-565.

  • C. J. O'Reilly and H. J. Rice, "An Assessment of Jet Noise Shielding Prediction Parameters," in 16th AIAA/CEAS Aeroacoustics Conference (31st AIAA Aeroacoustics Conference), 2010.

2009

  • Östberg M. and Kari L , A study of tilting and radial stiffness of elastomer bushes in the audible frequency range, 21st International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD’09), Stockholm, Sweden (2009).
  • Thomas D., Diedrichs B., Berg M. and Stichel S., Dynamics of a High-Speed Rail Vehicle Negotiating Curves at Unsteady Crosswind, paper presented at 21st International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD´09), Stockholm, Sweden (2009).
  • Drugge L. and Juhlin M., Aerodynamic loads on buses due to crosswind gusts – extended analysis, Presented at 21st IAVSD Symposium, KTH, Stockholm, Sweden (2009).
  • Favre T., Diedrichs B. and Efraimsson G., Detached-Eddy Simulations applied to Unsteady Crosswind Aerodynamics of Ground Vehicles, 3rd Symposium on Hybrid RANS-LES Methods, Gdansk, Poland (2009).
  • Diedrichs B., Unsteady Aerodynamic Crosswind Stability of a High-Speed Train Subjected to Gusts of Various Rates, Euromech Colloquium 509: Vehicle Aerodynamics – External Aerodynamics of Railway Vehicles, Trucks, Buses and Cars, Berlin, Germany (2009).
  • Cameron C. J., Lind E., Wennhage P., Göransson P., Material property steered optimization of a multifunctional body panel to structural and acoustic constraints, Proceeding of the 17th International Conference on Composite Materials (ICCM17), Edinburgh, Scotland (2009).

2008

  • Favre T., Efraimsson G. and Diedrichs B., Numerical Investigation of Unsteady Crosswind Vehicle Aerodynamics using Time-Dependent Inflow Conditions, 7th MIRA International Vehicle Aerodynamics Conference, Coventry, England (2008).
  • Stensson Trigell A, Berg M, Boij S, Efraimsson G, Jerrelind J, Wennhage P and Göransson P, ECO2 Vehicle Design an initiative for a holistic perspective on future vehicle concepts, Presented at TRA2008 in Ljubljana, Slovenia (2008).
  • Thomas D., Berg M. and Stichel S., Measurements and Simulations of Rail Vehicle Dynamics with respect to Overturning Risk, XXII International Congress of Theoretical and Applied Mechanics (ICTAM), Adelaide, Australia (2008).
  • Diedrichs B., Aerodynamic Calculations of Crosswind Stability of a High-Speed Train using Control Volumes of Arbitrary Polyhedral Shape, VI International Colloquium on Bluff Bodies Aerodynamics & Applications (BBAA), Milan, Italy (2008).
  • Lind E. and Göransson P., Optimising Open Porous Foam for Acoustical and Vibrational Performance, Symposium on Acoustic Modelling of Poroelastic Materials. Bradford, UK (2008).
  • Ramanathan S. K., Feng L., and Orrenius, U., Effects of damping treatments on acoustic properties of honeycomb panels, Proceeding of the 37th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2008), Shanghai, China (2008).
  • Cameron C. J., Wennhage P., Göransson P. and Rahmqvist S., Structural - Acoustic Design of a Multi-functional Sandwich Body Panel for Automotive Applications, 8th International Conference on Sandwich Structures (ICSS-8), Porto, Portugal (2008).
  • Larberg Y.R. and Åkermo M., On the interply friction of different generations of unidirectional prepreg materials, 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden (2008).
  • Åkermo M., Thermoforming of closed cell polymer foam and its residual compressive mechanical properties, 8th International Conference on Sandwich Structures, Porto, Portugal (2008).

2007

  • Rehnberg A and Drugge L, Pitch comfort optimisation of a front end loader using a hydropneumatic suspension, SAE Technical Paper 2007-01-4269, Presented at the SAE 2007, Commercial Vehicle Congress and Exhibition, Rosemont IL, USA (2007).
  • Juhlin M., Aerodynamic Loads on Buses due to Crosswind Gusts – On-road Measurements, Presented at 20th IAVSD Symposium, Berkeley, CA, USA (2007).
  • Larberg Y. R. and Åkermo M., In-Plane Properties of cross-plied unidirectional prepreg, 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan (2007).
Top page top